Plastic injection molding & Stamping die service  Whatsapp: +86 159 6253 6891

Leak Tester Quickens Testing of Stamping Die Parts Quality

Views: 352 Author: Site Editor Publish Time: Origin: Site

For 20 years, progressive-die-stamping specialist which Feiya Manufacturing Inc. has stayed focused on producing affordable, high-quality parts for its thousands of customers from overseas and domestic. This approach has definitely proved to be successful—enabling Feiya to grow from a small two-machine shop in 1998, to the first deep-draw metal stamping company in China. Today, it produces a wide range of components for automotive, digital products like camera spare parts, cellphone spare parts, plumbing, and power-tool companies in North and South America, and Asia.

Feiya relies on several high-speed transfer presses to make deep-drawn stamped metal parts up to 4.5 millimeters thick and 200 millimeters deep. The parts often have complex geometries and configurations, yet require no costly secondary processes.

Headquartered in Kunshan Suzhou, also operates production facilities in South African, Saudi Arabic and Suzhou, China. All of the plants are TS16949 and ISO14001 certified, and produce parts made of stainless steel, low carbon steel, aluminum, copper, brass and durable plastic. Other plant activities include prototyping, advanced-product development, tool design, value-added assembly and nondestructive testing.

Since 2010, TMMI has used differential pressure-decay leak testers to test small-volume cylindrical parts like fuel-delivery oxygen sensors and antilock brake system components. Each tester is located near a deep-drawn stamping press, which shapes flat metal into cylinders.

Initially, 3 testers for this progressive stamping die sheet application, before upgrading to Series 5 F520 units several years later. In differential pressure-decay testing, the test part and a reference part are simultaneously filled with the same amount of air. Any small variation or drop in differential pressure between the parts is recorded by the tester’s transducer membrane.

For this specific application, each part was filled with 5 psi of air and total cycle time was 0.14 second. Test parts with a leak rate exceeding 30 cubic centimeters per minute were rejected.

Last year, Feiya needed to further reduce testing cycle time to keep up with production. Company representatives discussed the situation with another company and decided to try its Series 6 F620 Primus testers. With a cycle time of only 0.09 second (0.01 second for fill, 0.05 second for stabilization and 0.02 second for testing), the testers helped TMMI nearly double its production to 500,000 parts per week.

The new tester is specially designed for fully or semiautomatic workbenches on production lines. It offers seven inputs, five outputs and multiple ranges of pressure drops (50, 500 or 5,000 pascals) and test pressures (75 mbar to 20 bar) measurement. More than 30 test programs are included and use different modes (pressure loss, flow units and blockage). Setup is easy, with the tester linking to equipment via an RS232 or RS485 serial port.

Model F620 stores 128 test programs and allows manual calibration on its front panel. The tester's interface enables it to be plugged into a PLC or test bench without having to reprogram either. 


Contact Us