Plastic injection molding & Stamping die service                   Whatsapp: +86 159 6253 6891

News & Events

English
You are here: Home » News » Product News » Advantages of plastic injection molding

content is empty!

Advantages of plastic injection molding

Views:6     Author:Site Editor     Publish Time: 2019-10-30      Origin:Site

The advanced machines are now in use, so the mold makers have to put less effort into performing Plastic Injection Molding. At present, we are going to tell you how the mold maker handles the machine and complete the tasks efficiently. Have a look:


Plastic Injection Molding

Clamping

The Plastic Injection Molding machine has different parts which perform various tasks. The clamping unit holds up the two halves of the mold injection altogether throughout the cooling and injection process.

Injection

In the injection process of plastic, the mold makers make use of plastic in the form of pallets. The mold makers first load up these pallets into the hopper, which is present on the top of the unit of injection. The pallets feed into a big cylinder where they go under heat until they reach their molten state.

In the cylinder of heating, there is a motor screw which combines the molten pallets and directs them to the cylinder’s end. At the point when enough material reaches the screw’s front, then the injection procedure starts. The mold makers insert the molten plastic into the mold by using the sprue. On the other hand, they manage the speed and pressure by making use of the screw.

Dwelling

There is a pause in the dwelling phase. When the mold makers inject the molten plastic into the mold, then they apply pressure on it. Because of this reason, the mold cavities fill up accurately.

Cooling

After dwelling, the mold makers cool down the mold so that the plastic in it gets cold and turn into a solid form.

Mold Opening

When the plastic gets solid, then the Injection Mold makers open the clamping unit again. By doing this, they will have the capacity to separate the two halves of the mold.

Ejection

In the end, the ejecting rod of the machine and the plate eject the final product from the mold. The Injection Mold makers recycle the additional runners and sprues for future Plastic Injection Molding. Also, they take the final product to the packaging area. Here, the packagers wrap up each product efficiently.


Related Products

content is empty!

NO.883,Wulian Road, Chengbei, Yuanshan Town, 215316, Kunshan City, Jiangsu , China 
+86-512-55191682
+86 159 6253 6891

HOW CAN WE HELP

SERVICE

MOLD & PARTS

GET A QUOTE